ATI Technologies AT6000 SIGNATURE SERIES Provozní pokyny stáhnout pdf (Strana 11)

Power Amplifier Specifications

*EIA 1kHz Power refers to maximum average power in watts at 1 kHz with 0.01% THD and noise.

**FTC Full Bandwidth Power refers to maximum average power in watts from 20Hz to 20 kHz with 0.05% THD and noise.

Any means, whether physical, electronic or otherwise without prior written consent from Amplifier Technologies, Inc.

Specifications are those in effect at the time of printing. Amplifier Technologies, Inc. reserves the right to change

specifications or designs at any time without notice.

Series

Number of Channels

EIA 1kHz Output Power at 8 Ohms*

EIA 1kHz Output Power at 4 Ohms*

FTC Full Bandwidth Output Power at 8 Ohms**

FTC Full Bandwidth Output Power at 4 Ohms**

Input Sensitivity for Full Rated Power

Frequency Response at Rated Output

20Hz to 20kHz ±0.1dB

Phase Response

+5 to -15 degrees from 20Hz to 20kHz at 1 watt

Signal-to-Noise Ratio “A-Weighted”

Greater than 128dB below rated FTC Full Bandwidth Output

Total Harmonic Distortion (THD)

Less than 0.05% at full rated FTC power; Less than 0.01% at full EIA power at 1kHz

Intermodulation Distortion (IMD)

Less than 0.05% at full rated FTC power; Less than 0.01% at full EIA power at 1kHz

Load Impedance

Safe with all types of loads. Rated for 4 to 16 ohms

Power Bandwidth FTC

+0, -3 db from 5 Hz to 80 kHz

Damping Factor

Greater than 400 from 10 Hz to 400 Hz

Crosstalk

Greater than –80 dB from 20 Hz to 20 kHz

Gain

Voltage gain of 28dB ±0.2 dB

Slew Rate

>60 V/µs

Input Impedance

Nominally 50 kΩ

Remote Trigger Voltage

3.3 to 24 Volts DC at 5 mA or greater

DC Output Offset

Less than ±5 mV

Power Requirements

120 VAC (other voltages available on export models)

Chassis Dimensions (H x W x D) Inches

Net Weight (lbs/kg) Model Dependent

Shipping Weight (lbs/kg) Model Dependent

Chassis Dimensions (H x W x D) mm

AT6000

2 to 7

350 Watts

450 Watts

300 Watts

450 Watts

1.95 Volts

Handles protrude 1¾” (44.5 mm); Add 1¼” (32 mm) for input/output jacks

86 to 136.4 / 39 to 62

96 to 146.4 / 43.6 to 65.5

241 x 438 x 470 (Without feet: H = 222.25)

9½ x 17¼ x 18½ (Without feet: H = 8

¾)

Page 11

1 2 ... 6 7 8 9 10 11 12

Komentáře k této Příručce

Žádné komentáře

ATI Technologies AT6000 SIGNATURE SERIES Provozní pokyny Strana 11

Komentáře k této Příručce

Související produkty a manuály pro Audio zesilovače ATI Technologies AT6000 SIGNATURE SERIES